Issue archive

https://doi.org/10.15255/KUI.2026.035
Published: Kem. Ind. 75 (13) (2026) 683–694
Paper reference number: KUI-35/2026
Paper type: Original scientific paper
Download paper:  PDF

Effect of Print Orientation and Post-Curing on the Properties of Parts Produced by Digital Light Processing

M. P. Marković, L. Štorga, E. Forjan and D. Vrsaljko

Abstract

Additive manufacturing (3D printing) is a layer-by-layer fabrication technique that enables the production of complex geometries from digital computer-aided design (CAD) models. In digital light processing (DLP) technology, the model is converted into sliced layers and manufactured by the selective photopolymerisation of a liquid resin using projected light. This study investigates how processing conditions and post-curing influence the properties of an acrylate-based photopolymer resin (AnyCubic 3D Printing UV Sensitive Resin) used in DLP 3D printing. The effects of printing orientation (0°, 45°, and 90°) and post-curing duration (0, 5, and 15 min) in a 405 nm chamber were analysed in terms of mechanical performance, thermal response, and chemical resistance. The experimental results indicated that printing orientation and post-curing time play a significant role in determining the mechanical and chemical behaviour of the material. Samples printed at 90° relative to the print bed exhibited the highest tensile strength (53.9 MPa) and fracture resistance (53.3 MPa), whereas 0° oriented samples showed the highest Young's modulus (1184 MPa). Solvent uptake was highest in acetone (11 %) and methanol (10 %), and decreased with post-curing time. Thermal analysis showed only minor changes in glass transition temperature (49.1–53.5 °C), while FTIR spectra revealed no significant differences related to post-curing conditions. Overall, the findings highlighted that mechanical and chemical properties of DLP-printed structures can be effectively tuned through printing orientation and post-curing strategy, while thermal properties remain unaffected.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Keywords

additive manufacturing, digital light processing, printing orientation, post-curing