Issue archive

https://doi.org/10.15255/KUI.2026.034
Published: Kem. Ind. 75 (13) (2026) 777–787
Paper reference number: KUI-34/2026
Paper type: Conference paper
Download paper:  PDF

CFD Modelling of a Double-Pipe Heat Exchanger

M. Čulina, M. Ćosić, Ž. Penga and A. Čelan

Abstract

This study examines the thermal and hydrodynamic behaviour of a 1.5 m laboratory-scale counter-current double-pipe heat exchanger, under selected operating conditions, using both experimental measurements and computational fluid dynamics (CFD). The main objective was to demonstrate a detailed procedure for CFD model development, including geometry preparation, mesh generation, near-wall treatment, and to assess how turbulence model selection and wall treatment affect the accuracy of numerical predictions. A three-dimensional CFD model was created in ANSYS Fluent 2024 R1. Particular attention was given to segmenting the geometry and generating a structured hexahedral mesh to ensure high mesh quality and compliance with the near-wall requirements of the turbulence models used. Two mesh configurations were developed: one for k-ε-based models with dimensionless wall distance (y⁺) values between 30 and 40, and a refined mesh for the SST k-ω model with y⁺ values between 1 and 5. The standard k-ε, realisable k-ε, and SST k-ω models were tested, with both standard and enhanced wall treatments applied to the k-ε based models. Predicted outlet temperatures showed good agreement with experimental results, with deviations ranging from 1 to 11 %, depending on the model. The SST k-ω model produced the most accurate outlet temperature predictions, with deviations below 1.5 % for both fluid streams. Pressure-drop values also closely matched those calculated using the Darcy-Weisbach equation. Overall, the study presents a complete, step-by-step development of the CFD model and demonstrates that the SST k-ω turbulence model achieves the best overall accuracy, although at the cost of significantly longer simulation times.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Keywords

double-pipe heat exchanger, CFD, mesh, turbulence models, temperature, pressure drop, velocity